In order to protect you and others from harm or protect your device from damage, please read the following information before using the device.

Do not install the device in the following places:

• Do not install the device in high-temperature and moist environment or the area close to magnetic field, such as around electric generator, transformer or magnet.

• Do not place the device near heating products such as electric heater or the fluid container.

• Do not place the device in the sunshine or near the heat source, which might cause discoloration or deformation of the device.

• Do not install the device in an unstable position to avoid the property losses or personal injury caused by the falling of device.

Guard against electric shock, fire and explosion

• Do not use damaged power cord, plug or loose outlet.

• Do not touch the power cord with wet hands or unplug the power cord

• by pulling.

• Do not bend or damage the power cord.

• Do not touch the device with wet hands.

• Do not make the power supply slip or cause the impact.

• Do not use the power supply without the manufacturer's approval.

• Do not have the liquids such as water go into the device.

Clean Device Surface

• Clean the device surfaces with soft cloth dipped in some water, and then rub the surface with dry cloth.

  
  

Other Tips

• In order to prevent damage to the paint layer or the case, please do not expose the device to chemical products, such as the diluent, gasoline, alcohol, insect-resist agents, opacifying agent and insecticide.

• Do not knock on the device with hard objects.

• Please be careful when standing up from under the device.

• Do not disassemble, repair or modify the device at your own discretion. The arbitrary modification is not covered under warranty. When any repair required, please contact the customer service center.

• If there is abnormal sound, smell or fume in the device, please unplug the power cord immediately and contact the customer service center.

• When the device isn’t used for a long time, the adaptor and memory card

• can be removed and placed in dry environment.