Monitor

As for monitoring function, the LCD will automatically display the corresponding menu in accordance with the registered door camera.

1. In the standby mode, press beneath Mon.

2. With one door camera registered, the indoor monitor will enter into monitoring mode directly.

3. With two door cameras registered, the LCD will display Monitor 1# and 2#. You can press Up or Down to choose the monitor which you need, then press beneath Select.

4. In monitoring mode, press Accept key to enter into intercom communication.

Note: Monitoring time can last up to 45 seconds.

Alarm

When someone takes the door camera apart from the bracket, the door camera and indoor monitor will give an alarm. The door camera will first call the main indoor monitor. If the main indoor monitor doesn’t respond, the door camera will call the sub indoor monitor. At this case, the call button is invalid on the door camera. Press or on indoor monitor to stop alarm sounds.

Notes:

1. The alarm time can be up to 5 minutes.

2. During the alarm, door camera can only connect one indoor monitor. Calling indoor  monitor If the visitor presses the Call button on the door camera, the corresponding indoor monitor rings and the image of the visitor appears on the LCD of indoor monitor.

1. If the resident doesn’t want to answer, press to cancel the call.

2. After the resident presses , the indoor monitor will stop ringing. Then the conversation starts. Press or Call button to end the conversation.

3. When the door camera calls indoor monitor, if the indoor monitor has no operation (press ), the indoor monitor will return to the main interface. The flashing icon of missed call will show in the upper left corner to remind the user of view the images. Pressing the End key in the main interface or viewing picture in the “Snap Show” can cancel the flashing icon.

Note: Missed call icon is displayed when Auto Snap is enabled.

Notes:

1. The ringing time can be up to 30 seconds.

2. The conversation can be up to 45 seconds. After 45 seconds, the call will  be disconnected automatically.

Unlocking

During conversation or monitor status, press button to unlock the door.

Backlight

1. If the door camera is supplied by DC 12V, the backlight of call button is on.

2. If the door camera is supplied by battery, the backlight of call button is off.

3. In the registering, calling, alarm, monitoring and intercom status, the backlight will flash.

Note: During the calling, alarm or monitoring status, if the door camera is powered by battery in power saving mode, the backlight of call button will be off.