Settings-DNAKE Knowledge Base

Settings

Turning On

To turn on the indoor monitor, press and hold .

Powering on the indoor monitor, the system will enter into the following interface:

Note: When the battery power of indoor monitor is insufficient, it will display an indication icon and emit warning tone. The indoor monitor will automatically turn off. You need to charge it.

Press on the indoor monitor, then the system will enter into the following interface:

Chapter 1: Volume

This function allows you to adjust the volume (9 levels are adjustable) during a call.

1. Press Up or Down to choose “Volume” menu, then press the button on indoor monitor.

2. Press Up or Down to choose talking volume(9 levels are adjustable), and press Left or Right to adjust.

3. Press Up or Down to choose ringtone volume(9 levels are adjustable), and press Left or Right to adjust.

4. To set the ringing time, you can press Up or Down to choose Ringing Time(1-30 seconds are selectable), and press Left or Right to adjust.

5. When setting Ringing Time at 0s, indoor monitor is on mute.

6. Press to save the settings and return to the previous menu. Note: You can also press Left or Right key to adjust the ringtone volume in the standby mode.

Chapter 2: Brightness

This function allows you to adjust the brightness (9 levels are adjustable).

1. Press Up or Down to choose “Brightness” menu, then press .

2. Press Left or Right to select the brightness level. Each time you press Left or Right , the indoor monitor displays with the selected brightness level .

3. Press to save the settings and return to the previous menu. Note: You can also press Up or Down key to adjust the brightness in the standby mode.

Note: You can also press Up or Down key to adjust the brightness in the standby mode.

Chapter 3: Key Tone

When the key is pressed, the indoor monitor acknowledges it with a key tone. Key tone can be disabled. In certain error conditions, there will be a warning tone when an incorrect key is pressed.

1. Press Up or Down to choose “Key Tone” menu, then press .

2.Press Up or Down to choose On or Off to enable or disable the function.

3. Press to save the settings and return to the previous menu.

Chapter 4: Ring Tone

This function allows you to change the ring tone of indoor monitor (There are three ring tones for your selection).

1. Press Up or Down to choose “Ring Tone” menu, then press to confirm .

2. Press Up or Down to select the ring tone . Each time you press Up or Down , the indoor monitor rings with the selected volume.

3. Press to save the settings and return to the previous menu.

Chapter 5: Snap Set.

1. Press Up or Down to choose “Snap Set.” menu, then press .

2.Press Up or Down to choose On or Off to enable or disable the function.

3. Press to save the settings and return to the previous menu.

With this Auto Snap On, the camera will take a photo of visitor automatically when the visitor presses the Call button on the door camera. You can check this photo easily in the indoor monitor.

Notes:

1. During the conversation, if you press the Snapshot key, the camera can take a photo of visitor and save it into the indoor monitor.

2. During the monitoring, if you press the Snapshot key, the camera can take a photo of the view and save it into the indoor monitor.

3. Up to 75 photos can be stored in the monitor. The previous ones will be removed automatically if the photos are more than 75 pieces in the indoor monitor.

Chapter 6: Snap Show

You can view or delete recorded photos in this menu. Door station number,missed call icon or the door camera's PIR icon will be displayed at the top of photos correspondingly.

1. Press Up or Down to choose “Snap Show” menu.

2. Press , and press Left or Right to view pictures.

3. To delete the photo, press Left or Right to choose the photo and then press . The display will show “ ? ”. Press to confirm.

4. This icon means Delete All. Pressing Unlock key, the system will prompt whether to delete all the photos. Press OK to delete and press Return to exit.

5. After one warning tone, it will display next photo.

6. Press to return to the previous menu.

Chapter 7: Date&Time

1. Press Up or Down to choose “Date&Time” menu, then press to Select.

2. To set the time, you can press Left or Right to choose the Hour or the Minute and press the Up or Down to adjust.

3. To select the date, you can press Left or Right to choose the Year or the Month or the Date, and press the Up or Down to adjust.

4. Press to save the settings and return to the previous menu.

Notes:

1. Use 24-hour system as time format and DD-MM-YYYY as date format.

2. Date & Time must be set in advance to ensure that the time displayed on the indoor monitor is correct.

3. After replacing the battery, please set the time and the date again.

4. The Date & Time setting order is Hour-Minute-Year-Month-Date.

Chapter 8: Door Set.

1. Press Up or Down to choose “Door Set.” menu, then press .

2. To adjust the volume of door camera, you can press Up or Down to choose (9 levels are adjustable), and press Left or Right to adjust.

3. To set the ring time, you can press Up or Down to choose Ring Time(1-15 seconds are selectable. When two indoor monitors are connected to one door camera, if the time set in two indoor monitors is different, the time is subject to the shorter one), and press Left or Right to adjust.

4. If setting Ringing Time at 0s, door station will not make a sound when the call button is pressed.

5. If you want to set the unlock time, you can press Up or Down to choose Unlock Time(1-9 seconds are selectable), and press Left or Right to adjust.

6. Press to save the settings and return to the previous menu.

Note: When two indoor monitors are connected to one door camera, the settings of these two indoor monitors should be the same.

Chapter 9: Language

1. Press Up or Down to choose “Language” menu, then press .

2. Press Up or Down to choose the corresponding language(0 stands for English, 1 stands for , 2 stands for Polish, 3 stands for German, 4 Dutch stands for French, 5 stands for Italian, 6 stands for , 7 stands for Portuguese Spanish, 8 stands for , 9 stands for ). Russian Turkish

3. Press to save the settings and return to the previous menu.

Chapter 10: Wallpaper

You can choose different wallpaper.

Chapter 11: Version

Press Up or Down to choose “Version” menu, then press .

You can check the software version in it.

Chapter 12 : Video set

1. Press Up or Down to choose “Video Set.” menu, then press to Select .

2. Press Up or Down to choose On or Off to enable or disable the function.

3. Press to save the settings and return to the previous menu.

With this Auto Video Record On, the camera will record the video of visitor automatically when the visitor presses the Call button on the door camera. You can view this record easily on the indoor monitor.

Notes:

1. During the conversation/monitoring, the camera can record the video of visitor and save it into the indoor monitor.

2. The longest time for video recording is 75 seconds.

Chapter 13: Video

1. Press Up or Down to choose “Video Record.” menu, then press to Select. SD card needs to be inserted, otherwise the following interface will appear. When the SD card is inserted, the upper right corner of the interface will appear .