Working logic：

Unlock from the indoor monitor(or click “call elevator” icon).

Monitor will sends command to Outdoor panel,then Outdoor panel sends command to EVC IP Relay Module via network(or RS485 command at the same time);then the corresponding relay will be triggered.

Step 1:

Connect the EVC ip relay module and PC to network switch.

Step 2:

Use our Search Tool to find IP address of EVC module The ID number is E×××× for the EVC module. You can query the device ID, Mac address and IP address.

Step 3:

Change the local IP address of the PC on the same network segment according to the IPaddress of the device.

Step 4:

Input the IP address of EVC to the browser, then input the user name and password(the default name is “admin”,the password is “123456”) to into the following interface: